£1,750 OFF The Grillo 10 AWD 27 Climber at ‪@TurnerGroundscare‬

SHOP GRILLO CLIMBER 10 AWD 27 AT ‪@TurnerGroundscare‬
Grillo Climber 10 AWD 27 is a unique hydrostatic brush-cutter. The permanent 4WD system combined with the 27 HP powerful engine (22 HP net power) offers brilliant performance on severe slopes and low-adherence grounds.

Read more and shop online here
www.turnergroundscare.co.uk

Remarkably efficient on high grass and up to 2.5 cm shrubs, this machine is ideal for agricultural and professional use.

Its compact size has been designed to boost its performance on slopes, and the Kanzaki hydrostatic transmission with the differential lock on the rear wheels allows you to work with maximum safety and stability.

CUTTING SYSTEM
The cutting height is adjusted via a soft and comfortable lever. The cutting deck stops in the chosen position when the lever is released.

Blades are engaged via an electric switch located near to the steering wheel. The electromagnetic clutch is fitted with a blade brake. The single-blade cutting deck has a working width of 98 cm, and the progressive and assisted cutting height ranges from 3.5 cm to a maximum of 13.5 cm. This 10 cm range allows the operator to negotiate curbs and obstacles allowing them to work on uneven grounds.

The whole cutting system is always kept parallel to the ground, this ensures top-cutting quality even after years of service.

The blade is made of special steel and has a low-noise profile, the double-cutting tips are retractable in case of impact and can be turned around when one side is worn out.
The whole structure of the cutting deck is very robust and remarkably resistant to impacts with stones. The large diameter blade shaft and cutting transmission guarantee reliability even under the most demanding conditions and for many hours in total safety.
The cutting deck has two side protection baffles that can be raised to make maintenance and cleaning easier.



THE ENGINE
The twin-cylinder, four stroke petrol engine has a 22 HP net power. It is fitted with a cyclonic professional air filter especially suitable for dusty environments and very easy to access for routine cleaning.

The low-emission silencer is made of stainless steel. The fuel tank has a capacity of 13 litres and is equipped with a large filler for easier refuelling and a built-in fuel indicator on the cap.



THE TRANSMISSION
The permanent four-wheel drive transmission is composed of two hydrostatic axles. The rear hydrostatic axle is equipped with differential lock via pedal, which proves to be exceptionally useful on severe slopes and low-adherence grounds.

Larger TRACTOR wheels are fitted to achieve more adherence and greater comfort on irregular ground.

The front wheel axle steers and tilts and it is equipped with a hydraulic system that combined with the differential on the rear axle ensures permanent drive on all four wheels to prevent the wheels from skidding even in the tightest turns.